Arming Perimeter Only (Stay) - Westec FirstGuard User Manual

ARMING PERIMETER ONLY
Using the Use this key when you are staying inside, but expect someone to use an
entry/exit door later.
3 STAY Key
1. Enter your security code and press the STAY key.
2. The keypad beeps three times and displays the armed message. The red
BEFORE ARMING,
close all doors and win-
dows (see CHECKING
3. The system arms. An alarm sounds immediately if a protected perimeter
FOR OPEN ZONES on
page 13)
Later arrivals can enter through an entry/exit door without causing an
alarm, but they must disarm the system within the entry delay period to
avoid sounding an alarm.
NOTE:
THE STAY KEY ARMS THE PERIMETER ONLY, THUS ALLOWING YOU TO MOVE
FREELY THROUGHOUT THE PREMISES.
WITH ENTRY DELAY ON
ARMED indicator lights.
window or non-entry/exit door is then opened, but you may otherwise move
freely throughout the premises.
If you wish to open the entry/exit door to let someone in after arming
STAY, you can re-start the exit delay at any time – simply press the [ ]
key, and then let that person in. This will avoid having to disarm the
system and then re-arm it again.
–16–
TYPICAL DISPLAY
"ARMED STAY"
AC
STAY