Checking For Open Zones - Westec FirstGuard User Manual

CHECKING FOR OPEN ZONES

Using the Before arming your system, all protected doors, windows and other protection
zones must be closed or bypassed (see BYPASSING PROTECTION ZONES
READY Key
section), otherwise the keypad will display a "Not Ready" message, and the
READY indicator light will not be lit.. The READY ( ) key can be used to display
all faulted zones, making it easier for you to secure any open zone.
To display faulted zones, simply press and release the READY ( ) key (do not
enter code first). Secure or bypass the zones displayed before arming the
system.
A "Ready" message will be displayed when all protection zones have been either
closed or bypassed and the keypad's READY indicator light (if present) will be lit.
TO DISPLAY OPEN ZONES, PRESS THE READY KEY.
TYPICAL DISPLAY
TYPICAL DISPLAY INDICATING OPEN PROTECTION ZONE TYPICAL DISPLAY
WHEN NOT READY TO ARM (AFTER PRESSING READY KEY) INDICATING "READY TO ARM"
AC 06 AC AC
NOT READY NOT READY READY
–13–