Re-Fitting The Transit Bars - Miele PW 6080 VARIO Operating And Installation Instructions

^ Release the catch and turn the right
hand transit bar anti-clockwise by
90°.
^ Then withdraw the transit bar.
,
To avoid the risk of injury the
holes for the transit bars must be
covered after they have been
removed. If they are not covered
there is a risk of injury.
^ Plug the holes with the plastic caps
supplied.
,
The machine must not be moved
without the transit bars in place.
Store them as shown or keep them
in a safe place for future use. They
must be re-fitted if the machine is to
be moved again (e.g. when moving
house).
,
When moving the machine make
sure it is stable.

Re-fitting the transit bars

Re-fitting is carried out by reversing the
procedure.
Installation
51