Water Drainage; Drain Valve Version; Machines With A Drain Pump - Miele PW 6080 VARIO Operating And Installation Instructions

Water drainage

Drain valve version

A motorised drain valve is used to drain
the machine. The DN 70 angle hose
provided enables the machine to be
drained via an on-site gully (with odour
trap).

Machines with a drain pump

The machine drains via a drain pump
with a delivery head of 1 metre*. The
drain hose must not be kinked as this
restricts drainage. The swivel elbow at
the end of the hose can be turned in
either direction, or can be detached if
required, with a sharp twist and pull.
Drain hose connection:
1.Connected securely to a plastic drain
pipe with a rubber nipple. There is
no need to use a non-return valve.
2. Connected securely to a standpipe.
3. Connected securely to a floor gully.
If required, the drain hose can be
extended to a length of 5 m. The
necessary parts can purchased from
the Miele Spare Parts Department or
your Miele dealer.
* For a delivery head of more than 1 m
(up to a max. of 1.6 m) a second
duo-drain pump is available with the
corresponding kit from the Miele Spare
Parts Department or your Miele Dealer.
Installation
55