External Dispensing System; Empty Sensor - Miele PW 6080 VARIO Operating And Installation Instructions

External dispensing system

Empty sensor

The machine is fitted with an adapter for an external
dispensing system. Up to six dispensing hoses (not supplied)
can be connected to the machine. The external pumps are
controlled by relays in the machine. Each relay is switched on
for 2 minutes at a time.
A separate connection box for electrically controlling the
dispensing pumps is required, and must be fitted by a
Miele approved service technician.
The reley is controlled as described in the separate
booklet supplied with the machine. The containers must
be filled with the correct detergent or disinfectant in the
order specified.
When the Empty sensor is activated, a message appears in
the display to show when an external liquid agent container
is empty (see Settings/Supervisor level in the separate
booklet supplied with the machine).
If a container is empty, the following message will come up in
the display before the start of the programme or whilst the
programme is running:
Fill the container
i
OK
H
A programme that has already been started continues to run
until it has finished.
^ Press short cut button D to delete the message in the
display, and refill the container.
Detergent
31