Char-Broil PATIO CADDLE 06601356 Assembly, Use & Care Manual page 9

Items to Assemble
7
1 Base Assy
6 Machine Screws (#10-24x1")
6 Lock Nut (#10-24)
Base Assy
#10-24
Lock Nut
Qty: 6
#10-24x1"
Screw
Qty: 6
Leg with handle must be
opposite to wheels in base.
Items to Assemble
8
1 Heating Element
2 Self-Tap Screws
#12x1/2"
Self-tap Screw
Qty: 2
Turn upside down to assemble base.
A) NOTE: Leg with handle must be opposite wheels in base.
B) Slide legs into slots in base assy, attach each leg with (2) #10-24x1" machine
screws and (2) #10-24 lock nuts.
A
A) IMPORTANT: Orient heating element inside grill bottom so that the notch is on top. ("BOTTOM" is
stamped on underside of bracket.) Slide element bracket through slot in side of insulation bowl and
through rectangular slot in grill body. Element bracket mounts snugly against inside of grill body. Attach
using (2) #12x1/2" self-tap screws from outside of grill bottom through element bracket holes on inside
of grill bottom
B) Push insulation side flaps down flush with bowl.
A
Heating Element
Base Assy
B
#10-24x1"
Machine Screw
#10-24
Lock Nut
Attach each leg using
screws and nuts as shown.
Complete upright view
#12x1/2"
Self-tap Screw
B
9