Table of Contents
Advertisement
Items to Assemble
3
3 Lid Hangers
3 Self-tap Screws
#12-1/2"
Self-tap Screw
Qty: 3
May be factory assembled.
Items to Assemble
4
1 Grill Bottom
1 Bottom Insulation Bowl
A) Place lid hanger bracket on upper lip of insulation bowl. Note: Adjust insulation bowl as necessary to align.
B) Secure lid hanger brackets with (1) #12x1/2" self-tap screw for each hanger.
C) Tighten wing nut from Step 2.
Lower end of lid hanger
bracket must rest on upper
lip of insulation bowl.
A
A) Fold flaps inwards and upwards (90 degrees) so they are horizontal.
B) Align rectangular slots.
C) Push insulation bowl tabs down and under to temporarily hold bowl in place while you work.
B
Repeat for all three holes
A
Bottom Insulation Bowl
Grill Bottom
B
C
7
Advertisement
Table of Contents
