Din Mount Radio Provision With Pocket - Metra Electronics METRA 99-7603 Installation Instructions Manual

DIN MOUNT RADIO PROVISION
*
Note: Refer also to the instructions included with the aftermarket radio.
Note: You will need to remove the
aftermarket radio's trim ring if
equipped.
1 Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward. (Figure A)
2 Slide the aftermarket radio into the
cage until it snaps into place. (Figure B)
3 Attach the trim plate supplied with the
kit to the front of the radio housing
assembly. (Figure B)
Continue to final assembly.
99-7603 KIT ASSEMBLY
A
B
3