Din Mount Radio Provision With Pocket - Metra Electronics 99-7877S Installation Instructions Manual

DIN MOUNT RADIO PROVISION WITH POCKET

*
Note: Refer also to the instructions included with the aftermarket radio.
1 Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2 Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure A)
3 Slide the aftermarket head unit into
the cage and secure. (Figure B)
4 Snap the pocket into the Radio
Housing. (Figure C)
5 Re-assemble dash in reverse order of
disassembly.
99-7877S KIT ASSEMBLY
3
A
B
C