Power On The System - Polycom realpresence group convene Setup Manual

10
Power on the display. When the Automatic Standby message appears,
select Yes to disable Automatic Standby. Otherwise, the display will go
into Automatic Power Down after four hours and it will not wake up for
a video call without manually turning on the display. When the codec
finishes booting up, refer to the Polycom RealPresence Group Series
Administrator Guide for details on codec settings configuration and IP
connectivity.
Automatic Standby
Automatic Standby is currently set at 4 hours.
Would you like to disable Automatic Standby?

POWER ON THE SYSTEM

Power/Menu buttons
Yes
Press "OK" button to select.
No
OK EXIT