Burner Valves - GE C2S985 Technical Service Manual

Burner Valves

To remove the single and tri-burner valves (Café
models):
1. Remove the control panel. (See
Electronic Range Control (ERC)
2. Pull the igniter switch off the burner valve stem.
(See
Igniter Switch Assembly
3. For single burner valves, remove the 13-mm nut
and 1/4-in. hex-head screw.
4. For the tri-burner valve, remove the 13-mm nut,
the 9/16-in. nut, and 1/4-in. hex-head screw.
9/16-in. Nut
Burner Valve
Touch Panel and
.)
.)
13-mm Nut
Burner Valve
13-mm Nut
– 36 –
5. Separate the burner tube from the burner valve.
Caution: Ensure the valve seal is in place before
installing the valve.
Valve Seal
Valve Seal
To remove the single burner valve (Profi le and GE
models):
1. Remove the manifold panel. (See
2. Pull the igniter switch off the burner valve stem.
(See
Igniter Switch Assembly
3. Remove the 13-mm nut and 1/4-in. hex-head
screw.
.)
Manifold Panel
.)
13-mm Nut
Burner Valve
(Continued next page)