GE C2S985 Technical Service Manual page 48

5. Remove the Phillips-head screw from the front
panel.
6. Remove 4 Phillips-head screws from the top of
the side panel.
7. On Profi le and GE models, remove the extra 1/4-
in. hex-head screw holding the side panel to the
rear touch panel and ERC bracket.
8. Carefully swing the side panel away from the
range. Use a large fl at blade screwdriver to pry
the panel out of the retainer clip while pulling
the top front of the side panel out.
– 48 –
Retainer Clip
Screwdriver