GE C2S985 Technical Service Manual page 40

To remove the lower oven door lock assembly:
1. Remove the left side panel. (See
2. Remove the two 1/4-in. hex-head screws
holding the door lock assembly to the frame.
3. Disconnect the wires from the lower oven TCO
(see
Cavity Thermal Cut Out (TCO)
from the latch motor, and the ground wire from
the lock assembly bracket.
Disconnect
4. Remove the wire bundle from the 2 wire
retainers.
.)
Side Panel
), the white wire
Disconnect
Wire Retainer
Wire Retainer
– 40 –
5. Pull the lock assembly out from the left side of
the frame.
6. Mark, then disconnect the 11 wires attached to
the lock assembly or transfer the wires, 1 at a
time, to the replacement lock assembly.