Table of Contents
Advertisement
Simple adjustment method
1. Select HORIZ. POSITION in the SIGNAL menu.
2. Press the
or
3. Select TRACKING in the SIGNAL menu.
4. Press the
or
5. Repeat steps 1 to 4 for optimum adjustment results.
6. Select VERT. POSITION in the SIGNAL menu.
7. Press the
or
Downloaded From projector-manual.com Mitsubishi Manuals
button to adjust the horizontal start position (or the left side of the image).
button to adjust the horizontal end position (or the right edge of the image).
button to adjust the vertical start position (or the upper edge of the image).
EN-27
Advertisement
Table of Contents
