Power Supply - Mitsubishi Electric PK10 User Manual

Power supply

Using the provided AC adapter (02550-0112-00 ) or an
optional Lithium-ion rechargeable battery .
Warning:
The projector must be used with the provided AC adapter.
Damage caused by the use of an incorrect adapter is not
covered under the warranty.
Using the AC adapter
3
1. Insert the plug from the AC adapter into the DC IN terminal.
2. Insert the appropriate end of the power cord into the
AC adapter.
3. Insert the plug on the power cord into a wall outlet.
The POWER indicator lights red when using the
AC adapter.
Use appropriate cord for your country.
Using the optional battery
The projector must be used with specified Lithium-ion
rechargeable battery (BT-PK10R 283P076-10). Charge
Downloaded From projector-manual.com Mitsubishi Manuals
1
2
the battery before using the projector for the first time use.
Using the projector for charging the battery. You may also
use the projector when charging the battery.
For battery charging
1. Move the battery latch to the open side.
2. Position the projector on the battery.
3. Match the battery carefully until it fits in place.
4
6
5
EN-11