Mitsubishi Electric PK10 User Manual page 12

4. Insert the plug from the AC adapter into the DC IN
terminal.
5. Insert the appropriate end of the power cord into the
AC adapter.
Warning:
Do not change the battery except this method. It may
cause battery exploding.
Do not remove the battery from the projector when
operating.
When remove the battery from the projector, power
off the projector and unplug AC adaptor.
6. Insert the plug on the power cord into a wall outlet.
The CHARGE indicator lights red when charging
is started and turns off when charging is
completed.
We recommended that you full charge the battery
all the time.
CHARGE (Red) CONDITION
On
Off
When the projector is off, the charger works as
a fast charging mode. It takes approximately 5
hours to complete charging.
When the projector is on, the charger works as
a slow charging mode. It takes approximately 7
hours to complete charging.
EN-12
Downloaded From projector-manual.com Mitsubishi Manuals
Charging battery
Battery full
For battery removal
Slide the battery lock switches on the two sides to remove
the battery from the projector.
Warning:
Please do not put battery into fire or heat, otherwise it
may cause heating, fire, rupture or explosion.
Please do not put battery away or transport it with
necklace, hairpin, etc., otherwise it may cause heating,
fire, leakage or explosion.
Neither the positive nor negative terminal of batteries
can touch any metal, otherwise it may cause heating,
fire, rupture or explosion.
Please do not poke battery with needle, hit, decompose
or try to transform it, otherwise it may cause heating,
fire, rupture or explosion.
Please do not use or put battery near fire or under
high-temp environment, otherwise it may cause
heating, fire, rupture or explosion.