Table of Contents
Advertisement
Connecting the cables
NOTE:
The monitor ships with select cables. Not all cables shown in this section are included with
the monitor.
1.
Place the monitor in a convenient, well-ventilated location near the computer.
2.
Connect the video cable(s).
NOTE:
inputs can be selected by pressing the Next Active Input button on the right side of the monitor
or through the On-Screen Display (OSD) by pressing the Menu button and selecting Input
Control.
Connect a VGA cable to the VGA connector on the rear of the monitor and the other end to
●
the VGA connector on the source device.
The monitor will automatically determine which inputs have valid video signals. The
Connecting the cables
7
Advertisement
Table of Contents
