Turning On The Monitor - HP K1M38AA User Manual

4. To attach the monitor to a swing arm or other mounting device, insert four mounting screws
through the holes on the mounting device and into the screw holes on the VESA mounting
bracket.

Turning on the monitor

1. Press the power button on the computer to turn it on.
2. Press the power button on the front of the monitor to turn it on.
CAUTION:
screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you
should always activate a screen saver application or turn off the monitor when it is not in use for a
prolonged period of time. Image retention is a condition that may occur on all LCD screens. Monitors
with a "burned-in image" are not covered under the HP warranty.
* A prolonged period of time is 2 consecutive hours of a static image.
NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be
enabled. To disable this feature, press and hold the monitor power button for 10 seconds.
Burn-in image damage may occur on monitors that display the same static image on
Turning on the monitor 13