Selecting Finishing Mode; Finishing Modes And Optional Finishing Devices - Toshiba e-Studio 5560c Copying Manual

3 BASIC COPY MODES

Selecting Finishing Mode

Finishing modes and optional finishing devices

See the table below for each finishing mode.
Finishing mode
Non-sort Non-staple
Sort ( P.68)
Group ( P.68)
Rotate sort ( P.69)
Staple sort ( P.70)
Magazine sort ( P.72)
Center fold ( P.72)
Saddle stitch ( P.72)
Magazine sort & center fold
( P.72)
Magazine sort & saddle stitch
( P.72)
Hole punch ( P.75)
Manual staple ( P.76)
The available finishing modes differ depending on the type of optional finishing devices (Finisher and Hole Punch Unit)
installed. Finishing devices available for this equipment are as follows:
Finisher
Finisher MJ-1103
Saddle Stitch Finisher MJ-1104
Hole Punch Unit
Hole Punch Unit MJ-6102
Check the finishing modes enabled with each finishing device.
Finishing mode
Non-sort Non-staple
Sort
Group
Rotate sort
Staple sort
Magazine sort
Center fold
Saddle stitch
Magazine sort & center fold
Magazine sort & saddle stitch
Hole punch
Manual staple
66

Selecting Finishing Mode

Copies exit without being sorted or stapled.
Copies exit in the same page order as the originals one set after another.
Copies grouped by page exit.
Copies exit set by set alternately in a different direction.
Copies exit with their corner stapled.
Copies exit in a book-type page order.
Copies exit in a book-type page order with their center folded.
Copies exit in a book-type page order with their center folded and stapled.
Magazine sort and center fold are used together.
Magazine sort and saddle stitch are used together.
Copies exit with their side punched.
Copies are stapled manually.
MJ-1103 &
MJ-1103
MJ-6102
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
— —
— —
— —
— —
Yes —
Yes Yes
Description
Devices
MJ-1104 &
MJ-1104
MJ-6102
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes —
Yes Yes
No device
Yes
Yes
Yes
Yes
—
Yes
—
—
—
—
—
—