4.EDITING FUNCTIONS
5
Key in the read values and specify the repeat count.
1) Press [X1], [X2], [Y1] and [Y2], and then key in the read value correspondingly.
2) Change the number of times you repeat the image (repeat count) by pressing either [
3) Press [OK].
The selected area will be copied from the top right corner in a vertical direction.
If the repeated image runs over the paper size, that part will not be copied.
6
Place the original again on the original glass with its
face down.
Place with its bottom toward you. Align its top left corner against that of
the original glass.
7
Select other copy modes as required, and then press the [START] button on the control
panel.
4 EDITING FUNCTIONS
2] or [
8].
Image Repeat
123