(Retain the switch and screws to be reinstalled into the double DIN trim plate during kit assembly). (“D” in Figure C) Continue to kit assembly. 99-7867 DASH DISASSEMBL Y "C" "C" "C" "C" "D"...
99-7867 KIT PREPARATION ACURA RSX 2002-2006 Mount the hazard switch to the back of the radio housing with (2) Phillips screws previously removed in Step 7 of the disassembly. (Figure A) Mount the factory bracket assembly to the back of the radio housing with (4) Phillip screws previously removed in Step 6 of the disassembly.
Slide the radio into the radio housing until the ISO brackets snap into place. (Figure A) Snap the trim plate onto the front of the radio housing. (Figure A) Continue to final assembly. 99-7867 KIT ASSEMBL Y ISO RADIO PROVISION...
*NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 99-7867 FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) Twist ends together...