Iso Mount Radio Provision With Pocket - Metra Electronics 99-7402 Installation Instructions Manual

ISO MOUNT RADIO WITH POCKET
Align the holes in the ISO brackets with
1
the holes in the radio. Mount the
brackets to the radio using screws
supplied with the radio. (Figure A)
2 Slide the radio bracket assembly into
the radio housing until it snaps into
place. (Figure B)
Snap the ISO trim-plate onto the front
3
of the assembled radio and housing.
(Figure B)
4
Attach the radio / housing assembly
to the radio trim panel using the
factory screws removed during
disassembly. (Figure C)
Continue to final assembly.
NOTE: To remove the radio unsnap and
remove the ISO trim-plate. Using a flat
blade screwdriver disengage ISO
brackets from the radio housing and
slide radio out of radio housing.
99-7402
4
KIT ASSEMBL Y
A
B
C