Din Head Unit Provision; Iso Din Head Unit Provision - Metra Electronics 99-5808 Installation Instructions Manual

DIN HEAD UNIT PROVISIONS:
Slide the DIN cage into the
1
Radio Housing and secure by
bending the metal locking tabs
down. (Figure A)
Slide the after-market head
2
unit into the cage and secure.
(Figure B)

ISO DIN Head Unit Provision

99-5808
Mount the ISO Brackets to the head
1
unit with the screws supplied with
the unit.
Slide the head unit into the radio
2
opening until the side clips engage.
Snap the Trim plate into the Radio
3
Housing.
3