Speaker Wiring - Rampage ACD-83 Owner's Manual

SPEAKER WIRING

SPEAKER WIRING SPEAKER WIRING
SPEAKER WIRING SPEAKER WIRING
REFER TO PAGE 3
l THE AMPLIFIERS IN THIS RADIO ARE ONLY DESIGNED FOR USE WITH 4 SPEAKERS.
FOR RADIO WIRING
l NEVER COMBINE (BRIDGE) OUTPUTS FOR USE WITH 2 SPEAKERS.
l NEVER GROUND NEGATIVE SPEAKER LEADS TO CHASSIS GROUND.
l FAILURE TO WIRE EXACTLY AS SHOWN BELOW MAY CAUSE ELECTRICAL
RCA LINE OUT JACKS
FOR USE WITH OPTIONAL
EXTERNAL AMPLIFIERS
9-PIN PLUGS
LEFT FRONT SPEAKER
WHITE w/BLACK STRIPE
WHITE
GREEN
GREEN w/BLACK STRIPE
LEFT REAR SPEAKER
WARNING!
RADIO
8-PIN DIN SOCKET FOR CONNECTION TO
OPTIONAL CD CHANGER
GRAY w/BLACK STRIPE
VIOLET w/BLACK STRIPE
HELP!
Monday - Friday 8:30am - 7:00pm Eastern
Saturday 9:00am - 5:00pm Eastern
1-800-645-4994
NOTE:
THIS RADIO WILL CONTROL RAMPAGE CD
CHANGER MODEL. CHECK WITH YOUR RAMPAGE
AUDIOVOX CAR STEREO SPECIALIST OR CALL
1-800-645-4994 FOR RECOMMENDATIONS OF
OTHER MODELS THAT WILL WORK WITH YOUR
RADIO.
DIN CABLE (SUPPLIED
OPTIONAL CD CHANGER
WITH CD CHANGER).
6
4-PIN PLUGS
SEE PAGE 3 FOR
RIGHT FRONT SPEAKER
RADIO WIRING
GRAY
VIOLET
RIGHT REAR SPEAKER
CO M P AC T
4 4 4 4 4