Table of Contents
Advertisement
favorite stations, activating the Auto-Store
Tuning feature will erase those stations and
enter the new ones. This feature is most useful
when traveling in a new area where you are
not familiar with the local stations.
bq
STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each
band, use the following procedure:
1. Turn the radio on and select the desired
band.
2. Select the first station to be pre-set
using the Manual TUNE or Automatic
bm
SEEK Controls
3. Press the pre-set button to be set and
continue to hold it in for
approximately 2 seconds. The pre-
set number, followed by CH (channel)
will appear on the display panel and
two beeps will sound, indicating that
the station is now set into that pre-set
memory position. The station can now
be recalled at any time by pressing that
button.
4. Repeat the above procedure for the
remaining 5 pre-sets on that band and
for the other 4 bands on the unit.
br
VACUUM FLOURESCENT DISPLAY
(VFD)
The Vacuum Fluorescent Display (VFD)
panel displays the frequency, time, and
activated functions using one of three
illumination levels as selected by the
bn
Loc/ILL button
.
bs
POWER LEVEL METER DISPLAY
This display consists of a left and right five-
bar graph, and a center graph which provides
a visual representation of the volume level and
the left and right channel audio signal levels.
The volume level is represented by the two
outer bar graphs. As the volume is increased,
the number of illuminated segments will
increase. The left and right channels are
represented by the three inner and center bar
graphs whose illuminated segments increase
and decrease as a function of the signal
strength applied to the left and right channels.
As the signal increases, the number of
illuminated segments will increase and vice-
versa.
bt
.
This button is used to select the radio, CD
player or CD changer (if installed) playback
mode. Each press of the button will select
a different mode as indicated on the display
panel.
During CD player operation, this button may
be used to change to radio CD player or CD
changer mode without ejecting the disc.
The DISC indication will remain on the
display panel to show that the CD changer
is operating. Press the button again to return
to CD player mode and resume play of the
disc from the point at which it was stopped.
bu
With the front panel in the fold-down position,
gently insert the disc into the slot (label
surface facing up) until the soft-loading
mechanism engages and pulls the disc in.
The LOAD indication will momentarily appear
on the display panel followed by the total
playing time of the disc. The (
illuminates and becomes animated, the
symbol lights, and the track number and
elapsed time will appear on the display
panel.
MODE SELECTOR (MODE)
DISC SLOT
) indication
8 8 8 8 8
Advertisement
Table of Contents
