Table of Contents
Advertisement
level setting in use before the Mute function
was activated.
During disc play, pressing this button will
mute disc audio; however, disc play will
continue and not be paused. During this time,
the
indication will remain on the display
panel to show that a disc is still loaded in
the unit.
bl
AM/FM BAND SELECTOR (BAND)
Each time this button is pressed, the radio band
is changed. The indication AM1, AM2, FM1,
FM2 or FM3 will appear on the display panel
according to your selection.
bm
UP/DOWN TUNE/SEEK/TRACK
(
/
) BUTTONS
To manually select a radio station, momentarily
press the Up Tuning (
the unit higher, or the Down Tuning (
to tune lower within the selected band.
Pressing either side of the button for longer than
0.5 second and then releasing will activate the
Automatic Seek Tuning function. The radio will
seek the next available station in the selected
direction and stop at that frequency. The Seek
function can be stopped by pressing the button
again or activating any other tuning function.
bn
LOCAL/ILL BUTTON
This feature is used to select the strength of
the signals at which the radio will stop during
Automatic Seek Tuning. Pressing and
holding the button will select the Local setting
(LOC will appear on the display panel) and
only strong (local) stations will be received.
Pressing and holding the button again will
select the Distant setting (LOC will disappear
from the display panel) and the radio will stop
7 7 7 7 7
at a wider range of signals, including weaker
(more distant) stations.
Each time the button is momentarily pressed
and released, the VFD display panel
back-lighting intensity will change from low-
to-medium-to-high, and then back to low,
thereby providing three different intensity
settings.
bo
During FM radio operation, this button is
used to select mono or stereo reception of
the broadcast signal. Under normal reception
conditions, the unit should be left in the
stereo mode as indicated by the ST
indication on the display panel when tuned
to an FM stereo signal. If the stereo signal
is too noisy for comfortable listening, press
the FM Mono/Stereo Selector button to
switch to mono reception (the ST
indication will disappear from the display
) button to advance
panel). To return to stereo reception mode,
) button
press the button again so that the ST
indication appears in the display panel.
bp
Press this button momentarily to scan the
stations pre-set into the six memories of the
current band in use. The unit will stop at each
pre-set station for 5 seconds before
continuing to the next pre-set station (the
pre-set number on the display panel will flash
during Pre-Set Scan operation). Press the
button again momentarily to stop Pre-Set
Scan operation and remain on the selected
frequency. If no buttons are pressed during
the scan, the unit will return to the original
station before the scan started.
Pressing and holding the button for longer
than 2 seconds will activate the Auto-Store
Tuning feature which will automatically scan
and enter up to 6 stations into the pre-set
memories on the band in use. If you have
already set the pre-set memories to your
FM MONO/STEREO BUTTON (MONO)
PRE-SET SCAN (PS)
AUTO-STORE TUNING (AS)
Advertisement
Table of Contents
