Table of Contents
Advertisement
display panel from a minimum BAS -12 to a
maximum of BAS +12 (BAS 00 indicates
flat response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
NOTE: Bass and Treble cannot be adjusted
while Equalizer function
ROCK, CLAS or POP mode.
5
TREBLE CONTROL
To adjust the treble level (equalizer function
inactive), first select the Treble mode by
pressing the SEL button
indication appears on the display panel.
Within 5 seconds of choosing the Treble
mode, press the
AUDIO CONTROL button
2
to decrease the treble response or the
AUDIO CONTROL button to increase it
as desired. The level will be shown on the
display panel from a minimum TRE -12 to a
maximum of TRE +12 (TRE 00 indicates flat
response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the
3
SEL button
so the BAL indication appears
on the display panel. Within 5 seconds of
choosing the Balance mode, press the
AUDIO CONTROL button
stereo balance to the left channel speakers
or the
AUDIO CONTROL button to adjust
it to the right channel speakers. The balance
position will be shown on the display panel
from BAL L16 (full left) to BAL R16 (full right).
When the volume level between the left and
right speakers is equal, BAL 00 will be
shown on the display panel. The display will
automatically return to the normal
indication 5 seconds after the last
adjustment or when another function is
activated.
7
cu
To adjust the front-rear speaker balance, first
is in
select the Fader mode by pressing the SEL
button
the display panel. Within 5 seconds of
choosing the Fader mode, press the
AUDIO CONTROL button
3
front-rear speaker balance to the rear
so the TRE
speakers or the
to adjust it to the front speakers. The fader
position will be shown on the display panel
from FAD R16 (full rear) to FAD F16 (full
front). When the level between the front and
rear speakers is equal, FAD 00 will be shown
on the display panel. The display will
automatically return to the normal indication
5 seconds after the last adjustment or when
another function is activated.
8
When listening to music at low volume
levels, this feature will boost the bass and
treble ranges to compensate for the
characteristics of human hearing. Press the
button momentarily to activate this feature;
the LOUD indication will appear on the
display panel. Pressing the button again
2
momentarily will deactivate the feature (the
to adjust the
LOUD indication will disappear from the
display panel).
9
Press this button momentarily to mute the
volume from the system ( MUTE will appear
blinking on the display panel). Pressing the
button again or adjusting the AUDIO
CONTROL
FRONT/REAR FADER CONTROL
3
so the FAD indication appears on
2
AUDIO CONTROL button
LOUDNESS CONTOUR (LOUD)
AUDIO MUTE SELECTOR (MUTE)
2
level will return to the volume
to adjust the
6 6 6 6 6
Advertisement
Table of Contents
