Rampage ACD-83 Owner's Manual page 14

CD CHA A A A A NGER CONTR CD CH CD CH NGER CONTR NGER CONTR NGER CONTROL OL OL OL OLS S S S S
CD CH CD CH NGER CONTR
Built into this radio are controls to operate
an optional CD changer. Please check with
your Rampage/Audiovox car stereo
specialist or call 1-800-645-4994 for
recommendations of the models that will
work with this radio.
Adjustment of the audio functions (volume,
tone, balance, and fader) for the CD changer
operate in the same manner as they do for
radio play. The following controls will operate
the CD changer when it is installed and
connected to this radio. Refer to the owner's
manual included with the CD changer for
instructions on the installation and correct
loading and use of the CD magazine.
dp
CD CHANGER MODE SELECTOR
(MODE)
During radio or CD play, press this button
to select operation of the CD changer as
shown by CDC on the display panel. Disc
play will begin and the disc and track
number will be shown on the display panel.
When the magazine is loaded into the
changer, play will begin from the first track
of the first disc in the magazine.
dq
DISC SELECT (D.UP/D.DN)
These buttons are used to select the desired
disc for play. To advance to a higher number
disc, press the D.UP button. To return to a
lower number disc, press the D.DN button.
The number of the disc in play will be shown
on the display panel.
dr
TRACK SELECT (
The Track Select functions are used to
13 13 13 13 13
quickly access the beginning of a particular
track. Each time the Forward Track Select
( ) side of the button is pressed, the next
higher track number will be selected as
shown on the display panel. Similarly, each
time the Backward Track Select (
is pressed, the next lower track number will
be selected as shown on the display panel.
ds
CUE/REVIEW FUNCTIONS(
)
High-speed audible search to any section
of the disc can be made by the Cue and
Review functions. Repeatedly press the Cue
( ) side of the button to advance rapidly
in the forward direction (disc play symbol
rotation on the display panel will stop) or
the Review (
advance rapidly in the backward direction.
dt
TRACK/DISC SCAN SELECTOR
(SCN)
When the SCN button is pressed, the SCAN
indication will appear on the display panel,
and the first 10 seconds of each track on
the disc will be played in order. When a
desired track is reached, press the SCN
button twice and play of the selected track
will continue (SCAN will disappear from the
display panel). The Track Scan mode will
also be canceled by activating the Repeat
or Random Play function.
When the Scan button is pressed twice
the DISC and SCAN indications will appear
on the display panel and the first 10 seconds
of the first track on each disc in the magazine
will be played. When a desired disc track is
reached, press the SCN button again and
play of the selected disc will continue (DISC
/ )
and SCAN will disappear from the display
panel). The Disc Scan mode will also be
canceled by activating the Repeat or Random
Play function.
) button
) side of the button to
/