Speaker Wiring - Rampage ACD-16 Owner's Manual

SPEAKER WIRING

SPEAKER WIRING SPEAKER WIRING SPEAKER WIRING SPEAKER WIRING
REFER TO PAGE 3
! THE AMPLIFIERS IN THIS RADIO ARE ONLY DESIGNED FOR USE WITH 4 SPEAKERS.
FOR RADIO WIRING
! NEVER COMBINE (BRIDGE) OUTPUTS FOR USE WITH 2 SPEAKERS.
! NEVER GROUND NEGATIVE SPEAKER LEADS TO CHASSIS GROUND.
! FAILURE TO WIRE EXACTLY AS SHOWN BELOW MAY CAUSE ELECTRICAL
RCA JACKS
LINE OUT
FOR USE WITH
OPTIONAL
EXTERNAL
AMPLIFIERS
RED=RIGHT REAR
WHITE=LEFT REAR
9-PIN PLUGS
LEFT FRONT SPEAKER
WHITE w/BLACK STRIPE
WHITE
GREEN
GREEN w/BLACK STRIPE
LEFT REAR SPEAKER
WARNING!
RADIO
8-PIN DIN SOCKET FOR CONNECTION TO
OPTIONAL CD CHANGER
SEE PAGE 3 FOR
RADIO WIRING
GRAY w/BLACK STRIPE
VIOLET w/BLACK STRIPE
HELP!
1-800-645-4994 1-800-645-4994 1-800-645-4994
1-800-645-4994 1-800-645-4994
Monday - Friday 8:30am - 7:00pm Eastern
Saturday 9:00am - 5:00pm Eastern
NOTE:
CHECK WITH YOUR RAMPAGE/AUDIOVOX CAR
STEREO SPECIALIST OR CALL 1-800-645-4994 FOR
RECOMMENDATIONS OF THE MODELS THAT WILL
WORK WITH YOUR RADIO.
DIN CABLE
(SUPPLIED WITH
CD CHANGER).
6
4-PIN PLUGS
RIGHT FRONT SPEAKER
GRAY
VIOLET
RIGHT REAR SPEAKER
OPTIONAL
CD CHANGER
C OMPAC T
4 4 4 4 4
128-5807C
5 of 44