IBM System x iDataPlex dx360 M3 User Manual page 82

To locate and install a newer version of IBM Systems Director, complete the
following steps:
Notes:
v Changes are made periodically to the IBM Web site. The actual procedure might
v To update IBM Systems Director software, you might have to use an external
1. Check for the latest version of IBM Systems Director:
2. Install the IBM Systems Director program.
If your management server is connected to the Internet, to locate and install
updates and interim fixes, complete the following steps:
1. Make sure that you have run the Discovery and Inventory collection tasks.
2. On the Welcome page of the IBM Systems Director Web interface, click View
3. Click Check for updates. The available updates are displayed in a table.
4. Select the updates that you want to install, and click Install to start the
If your management server is not connected to the Internet, to locate and install
updates and interim fixes, complete the following steps:
10. Return to the Welcome page of the Web interface, and click View updates.
11. Select the updates that you want to install, and click Install to start the
68
System x iDataPlex dx360 M3: User's Guide
vary slightly from what is described in this document.
USB CD-RW/DVD drive such as the IBM and Lenovo part number 73P4515 or
73P4516. See "Firmware updates" on page 66 for additional instructions about
using an external USB CD-RW/DVD drive.
a. Go to http://www.ibm.com/systems/management/director/downloads.html.
b. If a newer version of IBM Systems Director than what comes with the server
is shown in the drop-down list, follow the instructions on the Web page to
download the latest version.
updates.
installation wizard.
1. Make sure that you have run the Discovery and Inventory collection tasks.
2. On a system that is connected to the Internet, go to http://www.ibm.com/
eserver/support/fixes/fixcentral/.
3. From the Product family list, select IBM Systems Director.
4. From the Product list, select IBM Systems Director.
5. From the Installed version list, select the latest version, and click Continue.
6. Download the available updates.
7. Copy the downloaded files to the management server.
8. On the management server, on the Welcome page of the IBM Systems
Director Web interface, click the Manage tab, and click Update Manager.
9. Click Import updates and specify the location of the downloaded files that you
copied to the management server.
installation wizard.