Legislation - Baxi Combi 130 HE Installation & Servicing Instructions Manual

IMPORTANT - Installation, Commissioning, Service & Repair
This appliance must be installed in accordance with the manufacturer's
instructions and the regulations in force. Read the instructions fully before
installing or using the appliance.
In GB, this must be carried out by a competent person as stated in the Gas
Safety (Installation & Use) Regulations.
Definition of competence: A person who works for a CORGI registered
company and holding current certificates in the relevant ACS modules, or
valid ACoP equivalents, is deemed competent.
In IE, this must be carried out by a competent person as stated in I.S. 813
"Domestic Gas Installations".
Lifting - This product should be lifted and handled by two people. Stooping
should be avoided and protective equipment worn where necessary. Carrying
& lifting equipment should be used as required.
The addition of anything that may interfere with the normal operation of the
appliance without express written permission from the manufacturer or his
agent could invalidate the appliance warranty. In GB this could also infringe
the Gas Safety (Installation and Use) Regulations.
Warning - Check the information on the data plate is compatible with local
supply conditions.
"Benchmark"
Installation, Commissioning and Service Record Log Book
Please ensure that your installer has completed the Installation and
Commissioning sections of the Log Book and hands the Log Book over. The
details of the Log Book will be required in the event of any warranty work.
Keep the Log Book in a safe place and ensure that the relevant sections are
completed at each subsequent regular service visit.
All CORGI registered installers carry a CORGI identification card and have a
registration number. Both should be recorded in your boiler Log Book. You
can check your installer is registered by telephoning +44 (0)1256 372300 or
writing to:-
Chineham Business Park,
Basingstoke. RG24 8WG
4
1 Elmwood,
Crockford Lane,

0.0 Legislation

Baxi declare that no substances harmful to
health are contained in the appliance or used
during appliance manufacture.
The appliance is suitable only for installation in
GB and IE and should be installed in accordance
with the rules in force, and only used in a suitably
ventilated location.
In GB, the installation must be carried out by a
CORGI Registered Installer. It must be carried out in
accordance with the relevant requirements of the:
• Gas Safety (Installation & Use) Regulations.
• The appropriate Building Regulations either The
Building Regulations, The Building Regulations
(Scotland), Building Regulations (Northern Ireland).
• The Water Fittings Regulations or Water Byelaws
in Scotland.
• The Current I.E.E. Wiring Regulations.
Where no specific instructions are given, reference
should be made to the relevant British Standard Code
of Practice.
In IE, the installation must be carried out by a
competent person and installed in accordance with
the current edition of I.S. 813 'Domestic Gas
Installations', the current Building Regulations and
reference should be made to the current ETCI rules
for electrical installation.
All systems must be thoroughly flushed and
treated with inhibitor (see section 6.0).
Codes of Practice, most recent version should
be used
In GB the following Codes of Practice apply:
Standard Scope
BS 6891 Gas Installation.
BS 5546 Installation of hot water supplies for
domestic purposes.
BS 5449 Forced circulation hot water systems.
BS 6798 Installation of gas fired hot water boilers.
BS 5440 Part 1 Flues.
BS 5440 Part 2 Ventilation.
BS 7074 Expansion vessels and ancillary equipment
for sealed water systems.
BS 7593 Treatment of water in domestic hot water
central heating systems.
In IE the following Codes of Practice apply:
Standard Scope
I.S. 813 Domestic Gas Installations.
The following BS standards give valuable additional information;
BS 5546 Installation of hot water supplies for
domestic purposes.
BS 5449 Forced circulation hot water systems.
BS 7074 Expansion vessels and ancillary equipment
for sealed water systems.
BS 7593 Treatment of water in domestic hot water
central heating systems.