Display - Miele G 6900 Operating Instructions Manual

Guide to the appliance

Display

General
The display is used to select or set the
following:
– the programme
– any extras
– the delay start function
– the menu
Settings 
– information
The display can show the following:
– the programme name
– the stage the programme is at
– the current time of day and the date
– the estimated time left for the pro‐
gramme to run
– the energy and water consumption
(EcoFeedback)
– any relevant fault messages and in‐
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensors during this
time.
To switch the dishwasher back on
again, press the  sensor.
8
A dash  in the display next to a sensor
indicates that a function can be selec‐
ted with that sensor. The relevant sen‐
sor lights up.
The scroll bar  on the right of the dis‐
play indicates that more options or
more text are available which can be
displayed by touching the relevant illu‐
minated sensor.
A dotted line will appear under the last
option available in a list.
is used to confirm a message or
OK
setting and also to move to the next
menu or another level.
A tick  will appear beside the option
which is currently selected.
To exit a sub-menu, touch the Back
sensor .
If you do not press any of the sensors
for several seconds, the display will re‐
turn to the previous level. You may
need to enter your settings again.
The menu is used to alter
Settings 
the dishwasher's electronics to suit
different requirements (see "Settings").