Delay Start With Ecostart - Miele G 6900 Operating Instructions Manual

Delay start with EcoStart

There are three ways of starting the
programme by means of delaying the
start. You can set the start time or the
finish time of a programme. You also
have the option of taking advantage of
time variable economy rates of electrici‐
ty using the
EcoStart
When using the Delay start function,
make sure that the detergent com‐
partment is dry before adding deter‐
gent. Wipe dry with a cloth if neces‐
sary. If the compartment is wet,
powder detergent can become lum‐
py and stick to the dispenser, with
the result that it is not fully dis‐
pensed.
Do not use liquid detergent when se‐
lecting Delay start, as it can run into
the dishwasher before it is required.

To prevent children coming into
contact with dishwasher detergent:
Add the detergent immediately be‐
fore starting the programme, i.e. be‐
fore activating delay start with
Then lock the door with the safety
lock.
function.
.
OK
Programme options
 Switch the dishwasher on using the
 sensor.
 Select the programme you want from
the main menu.
 Select the
Delay start
programme menu for the selected
programme.
You then have a choice of
and .
at EcoStart
 Select the one you want.
Now enter the time you want.
If, while you are setting the time, you do
not press any sensors for several sec‐
onds, the display will revert to the previ‐
ous menu. You will then have to enter
your settings again.
If you keep the
+
the value shown will automatically in‐
crease or decrease.
If the time of day display has been
switched off (see "Settings menu,
Time") the display will go out after a
period of 10 minutes.
To switch the display back on for a
few minutes press the  sensor.
option from the
,
Start at
or sensor pressed,
-
Finish
51