Table of Contents
Advertisement
Starting the programme
Press the Start sensor.
The programme starts, and the prompt
Crockery can be added
play.
As long as this prompt is showing,
crockery can be added without com‐
promising the wash results.
Water in the dishwasher may be
hot. Danger of scalding from water in
the cabinet.
Make sure you open the door very
carefully.
A programme should only be cancel‐
led in the first few minutes, if at all.
Otherwise important programme
stages could be omitted.
shows in the dis‐
Display
The estimated duration of the pro‐
gramme selected appears in hours and
minutes in the display before the pro‐
gramme begins. During the programme,
the time left until the end of the pro‐
gramme is displayed.
Symbols appear to indicate which
stage the programme is at:
Pre-wash / Soak
Main wash
Interim rinse
Final rinse
Drying
Finish
The programme duration displayed may
vary with the same programme. It is in‐
fluenced by, among other things, the
water temperature at each intake, the
reactivation process, the type of deter‐
gent, the amount of crockery and how
dirty it is.
When a programme is selected for the
first time, the display shows an average
duration for a cold water intake.
The durations shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the pro‐
gramme duration required.
Operation
45
Advertisement
Table of Contents
