Delay Start With Ecostart - Miele HG05 Operating Instructions Manual

Options

Delay Start with EcoStart

There are three ways of delaying the
start of a program. You can set the start
time or the finish time of a program. You
also have the option of taking advan-
tage of time variable economy rates for
electricity by using the
tion.
When using the Delay Start function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet, pow-
der detergent can become lumpy
and stick to the dispenser, with the
result that it is not fully dispensed.
Do not use liquid detergent when se-
lecting Delay Start, as it can run into
the dishwasher before it is required.

To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the pro-
gram, i.e., before you activate the
FlexiTimer with
child lock.
56
EcoStart func-
OK . Also activate the
 Turn the dishwasher on using the 
sensor.
 Select the program you want from the
main menu.
 Select the
Delay Start
program menu for the selected pro-
gram.
You then have a choice of
and .
at EcoStart
 Select the desired function.
Now enter the required time.
If, while you are setting the time, you do
not press any sensors for several sec-
onds, the display will revert to the previ-
ous menu. You will then have to enter
your settings again.
If you keep the +
the value shown will automatically in-
crease or decrease.
If the time of day display has been
switched off (see "Settings menu,
Time"), the display message will go
out after 10 minutes following activa-
tion of a delay start time.
To switch the display message back
on for a few minutes, press the 
sensor.
option from the
Start at ,
or - sensor pressed,
Finish