Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha Aerox R NS50F Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
8. Connect the headlight coupler.
9. Install the cowling.
10. Have a Yamaha dealer adjust the
headlight beam if necessary.
6
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
ZAUM0937
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10682]
6-27
EAU24134
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
ZAUM0938
ZAUM0939
2. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
EAU24205