Yamaha Aerox R NS50F Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
 All LCD segments and warning
lights come on and then go off.
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
settings while riding can distract the
3
operator and increase the risk of an
accident.
The multi-function display is equipped
with the following:
 a digital clock
 a digital speedometer (which
shows riding speed)
 an odometer (which shows the to-
tal distance traveled)
 a tripmeter (which shows the dis-
tance traveled since it was last set
to zero)
 a fuel reserve tripmeter (which
shows the distance traveled on
the fuel reserve)
 an oil change indicator (which
shows when the engine oil should
be changed)
 a fuel gauge
 a self-diagnosis device
TIP
 Be sure to turn the key to "
EWA12313 fore using the "RESET/SELECT"
button.
 For the U.K. only: To switch the
speedometer and odometer/trip-
Changing
meter displays between kilome-
ters and miles, when the main
switch is turned to "
"RESET/SELECT" button for at
least eight seconds.
To set the clock:
1. Select the odometer and push the
"RESET/SELECT" button for at
least three seconds.
2. When the hour digits start flash-
ing, push the "RESET/SELECT"
button to set the hours.
ZAUM1064
3. To change the minutes digits,
" be-
4. When the minutes digits start
", press the
ZAUM1065
5. Push the "RESET/SELECT" but-
TIP
After setting the clock, be sure to push
the "RESET/SELECT" button for at
least three seconds before turning the
key to "
be set.
3-4
push the "RESET/SELECT" but-
ton for at least three seconds.
flashing, push the "RESET/SE-
LECT" button to set the minutes.
ton for at least three seconds to
start the clock.
", otherwise the clock will not