Kranzle K 1050 TS T Operation Manual page 31

K 1050 TS T
Pos. Bezeichnung
1 Gehäuseplatte
2 Öldichtung 12 x 20 x 5
3 O-Ring 78 x 2
4 Plungerfeder
5 Federdruckscheibe Ø12mm
6 Plunger 12 mm AC mit Wellensicherungsring
7 Wellensicherungsring Ø12mm
8 Taumelscheibe 10,0°
9 Öleinfüllschraube
10 Axial-Rillenkugellager 3-teilig
13 Schraube M 6 x 30
14 O-Ring 14 x 2
Oil change
If oil needs to be changed during repair, the unit is to turned into horizontal
position with its head upside down prior to unscrewing the drain plug over a
container. The oil is to be captured in a container and subsequently properly
disposed of. Then screw oil plug back on again over a container. Use small
funnel when refilling with fresh oil.
Fresh oil: 0.1 l - Kränzle Gear Oil (40.092 2) or W 15/40.
Stück Art.-Nr.
1 49.200
3 43.081
1 49.201
3 49.203
3 49.219
3 49.209
3 49.230
1 49.202-10,0
1 43.437
1 49.208
4 43.037
1 43.445
31