Related Manuals for Kranzle K 2017
Summary of Contents for Kranzle K 2017
- Page 1 Operating manual - USA - with spare parts list High-pressure cleaner K 2017 K 2017 T K 2020 K 2020 T 115 V ~ / 60 Hz www.kraenzle.com...
-
Page 2: High-Pressure Cleaner
Operating manual High-pressure cleaner K 2017 K 2017 T K 2020 K 2020 T Operating manual! This manual is a translation of the original manual. Read and conform safety instructions before use! Technical data will be found in the Spare parts list. -
Page 3: Table Of Contents
Kränzle high-pressure cleaners are characterized by their convenient breakdown of the K 2017, K 2017 T, K 2020 and K 2020 T. and compact design as well as their high suitability for everyday use. -
Page 4: Safety Notes
Safety notes Safety notes - This is prohibited! User operating the high-pressure cleaner should wear the necessary protective Replacement of the power supply cables is only permitted by use of an original clothing, i.e. waterproof clothing, rubber boots, safety goggles, ear protection power supply cable of the manufacturer and must be performed by a qualified headwear etc. - Page 5 Safety notes - This is prohibited! Safety notes - This is prohibited! Never direct the high-pressure jet at the high- Never direct the high-pressure jet at people or pressure cleaner itself! The high-pressure cleaner animals! Never direct the high-pressure jet at may not be placed within reach of the high- yourself or other persons, not even to clean pressure jet spray mist!
-
Page 6: Description Of High-Pressure Cleaner
Design: K 2017 and K 2020 - without hose drum This is what you have purchased: The K 2017 and K 2020 cleaner is a mobile high-pressure cleaner with an advanced arrangement system. Please see construction scheme for more details. - Page 7 Design: K 2017 T and K 2020 T - with hose drum This is what you have purchased: The K 2017 T and K 2020 T cleaner is a mobile high-pressure cleaner with an advanced arrangement system. Please see construction scheme for more details.
-
Page 8: General Rules
General rules General rules Intended use Oil change This high-pressure cleaner is to be used solely for high-pressure water jet cleaning applications without detergents or low-pressure cleaning work with detergents The first oil change should be carried out (e.g. with a foam injector or washing brush). after approximately 50 operating hours, then every year or after 250 operating Environmental, refuse disposal and water protection regulations... -
Page 9: Functional Details
Please pay attention to the regulations of your waterworks company! side. For K 2017, K 2017 T, K 2020, K 2020 T with a 20 A delay action fuse on the In accordance with DIN EN 61770, the high-pressure cleaner may mains side. -
Page 10: Motor Protection Switch
The safety trigger gun is a safety device. Repairs should only be perfor- The K 2017, K 2017 T, K 2020 and K 2020 T are equipped with a total stop system. med by qualified persons. Should replacement parts be required, use After water connection and high-pressure hose connection you switch the only components authorized by the manufacturer. -
Page 11: Functional Details
Prior to putting the high-pressure cleaner into operation make sure that all safety instructions be observed. Neither set up or operate the K 2017, K 2017 T, K 2020 and K 2020 T in rooms where there is a risk of fire or explosion nor put it into puddles. - Page 12 Putting into operation Putting into operation Check water inlet filter for cleanliness For high-pressure cleaners with hose prior to putting the high-pressure drum, however, it must be uncoiled cleaner into operation. completely. For high-pressure cleaners Manually unscrew plug-in coupling. without hose drum the high-pressure Take out the water inlet filter using hose included in the scope of the needle nose pliers and thoroughly...
- Page 13 13. Adjust operating pressureinfinitely using the rotary handle. The maximum pressure is factory-set. 14. The K 2017, K 2017 T, K 2020 and K 2020 T units are equipped with a support for the safety trigger gun with lance during breaks.
-
Page 14: Applying Additives
Switch off the high-pressure cleaner Suction of additives For K 2017, K 2017 T, K 2020 and K 2020 T a built-in injector provides the facility 2. Cut off the water supply to suck in additives. By pushing the Vario-Jet lance to the front the high-pressure Open the safety trigger gun catch briefly until the pressure is released cleaner is adjusted to low pressure and a vaccum is build up in the injector. -
Page 15: Small Repairs - Do It Yourself
Small repairs - do it yourself Small repairs - do it yourself Problem Problem No water from nozzle although the high-pressure cleaner is running. Irregular jet from nozzle. The stainless steel pressure gauge shows full pressure. The stainless steel pressure gauge shows low pressure. Cause Cause Most likely the nozzle is blocked. - Page 16 Small repairs - do it yourself Small repairs - do it yourself Problem Problem After closing the safety trigger gun the high-pressure cleaner After closing the safety trigger gun the high-pressure cleaner keeps switching on and off. keeps switching on and off. The stainless steel pressure gauge continuously displays full pressure.
-
Page 17: Kränzle Accessories
Kränzle accessories Kränzle accessories Rotating washing brush Stainless steel pipe 500 mm Brush head ∅ 180 mm Foam injector Nozzle size 3.2 mm 1 litre, with container With anti-twist protection Dosage in 5 levels With plug-in nipple With plug-in nipple Ord. -
Page 18: Eu Declaration Of Conformity
Any changes made to the safety devices of the product or instances of Noise pressure level, typical: K 2017, K 2017 T: 87 dB (A) maloperation – such as exceeding the temperature and speed limits, K 2020, K 2020 T: 89 dB (A) undervoltage, insufficient water supply and sewage water, or failure to use the product for the intended purpose –... -
Page 19: Technische Daten
Technische Daten Technical data Technische Daten K 2017 K 2017 T K 2020 K 2020 T Technical data K 2017 K 2017 T K 2020 K 2020 T Arbeitsdruck, stufenlos regelbar 10-110 bar / 1 - 11 MPa 10-135 bar / 1 - 13,5 MPa Operating press. -
Page 20: Schaltplan Wiring Diagram
Schaltplan Schaltplan Wiring diagram Wiring diagram K2017, K2017 T and K2020 / K2020 T Schaltplan K2017, K2017 T und K2020 / K2020 T Wiring diagram 115 V, 60 Hz 115 V, 60 Hz On- Off switch with 20 Ampere Ein- /Ausschalter mit 20 Ampere overload protection Überlastschutz Inlet line... -
Page 21: Spare Parts List
Kunststoff senkschraube 5,0 x 20 45.421 1 Radkappe 46.011 Gummi-Anschlag-Dämpfer 25 x 30 49.010 17.1 Frontplatte (K 2017) 48.091 1 17.2 Frontplatte (K 2017 T) 48.091 2 17.3 Frontplatte (K 2020) 48.091 3 17.4 Frontplatte (K 2020 T) 48.091 4 Knickschutz 48.004 Schraube 5,0 x 14 43.426... - Page 22 Gegenmutter für PG 11 44.521 Lüsterklemme 3-polig 43.326 Schraube 3,5 x 20 43.415 K 2017 / K2017 T / K2020 / K2020 T Motorgehäuse mit Stator Wechselstrom 48.090 Kabel mit Stecker 20A for K2020 43.522 without groundfall interruptor Kabel mit Stecker 20A for K2020 14.1...
- Page 23 Getriebeteil Getriebeteil Transmission Transmission K2017 / K2017 T K 2020 / K2020 T Position Bezeichnung Stck. Bestell-Nr. Position Bezeichnung Stck. Bestell-Nr. Description Qty. Item no. Description Qty. Item no. Gehäuseplatte für 18 mm Plunger 41.020 2 Gehäuseplatte für 18 mm Plunger 41.020 2 Öldichtung 18 x 28 x 7 41.031...
- Page 24 Ersatzteilliste Unloaderv./ Druckschalter Ersatzteilliste Unloaderv./ Druckschalter Spare parts list unloader v./ pressure s. Spare parts list unloader v./ pressure s. Position Bezeichnung Stck. Bestell-Nr. Description Qty. Item no. O-Ring 16 x 2 13.150 O-Ring 13,94 x 2,62 42.167 O-Ring 11 x 1,44 12.256 Edelstahlsitz 14.118...
- Page 25 Ersatzteilliste Ventilgehäuse - 18 mm Ersatzteilliste Ventilgehäuse - 18 mm Spare parts list valve housing - 18 mm Spare parts list valve housing - 18 mm Position Bezeichnung Stck. Bestell-Nr. Description Qty. Item no. Ventilgehäuse (TS) 42.160 5 Ventilgehäuse (TST) 42.160 Ventilstopfen 41.714...
- Page 26 Ersatzteilliste Schlauchtrommel Ersatzteilliste Schlauchtrommel Spare parts list hose drum Spare parts list hose drum K2017 T, K2020 T Position Bezeichnung Stck. Bestell-Nr. Description Qty. Item no. Seitenschale 48.101 Trommelteil 48.102 Knickschutz 40.162 Kunststoff schraube 5,0 x 20 43.018 Antriebswelle 48.104 1 Lagerklotz links 43.810 Schraube 6,0 x 30...
- Page 27 Ersatzteilliste Schmutzkiller Notizen Spare parts list dirtkiller Notes Position Bezeichnung Stck. Bestell-Nr. Description Qty. Item no. Sprühkörper 41.520 O-Ring 6,86 x 1,78 41.521 Düsensitz 41.522 Düse 03 41.523 4 Düse 042 41.523 Stabilisator 41.524 O-Ring 13.150 Sprühstopfen 41.526 Rohr 500 mm 2x M 12 x 1 41.527 1 Stechnippel D12 13.477...
-
Page 28: Inspection Reports
Inspection reports Inspection reports High-pressure cleaners for industrial use have to be checked by an expert every High-pressure cleaners for industrial use have to be checked by an expert every 12 months! Inspection report on annually carried out Labour Safety Inspection (UVV) 12 months! Inspection report on annually carried out Labour Safety Inspection (UVV) according to the Guidelines for Liquid Spray Equipment. - Page 29 Josef Kränzle GmbH & Co. KG Rudolf-Diesel-Straße 20 89257 Illertissen (Germany) sales @ kraenzle.com Made Germany www.kraenzle.com...
Need help?
Do you have a question about the K 2017 and is the answer not in the manual?
Questions and answers