Table of Contents
Advertisement
Control Center & Flexikey®
Overclocking should only be enabled when powered by a plugged-in adapter, and not on battery power.
The Fan Speed will also automatically be set to overclock (do not adjust this fan speed setting if you have
enabled GPU overclocking).
Click On to enable GPU overclocking, and Save to retain the setting changes, and then click OK when the sys-
tem warning message appears. The message highlights the fact that while overclocking the GPU offers a boost
to graphics performance, it can cause system instability in certain circumstances as the harder you push the pro-
cessor, the more power you will need to supply to it, and the hotter the system will run. Therefore it is not rec-
ommended that you enable GPU overclocking for extended periods, only as and when specifically required.
B
Figure B - 11 - GPU Overclocking
B - 16 GPU Overclocking
Advertisement
Table of Contents
Need help?
Do you have a question about the SKY X9 and is the answer not in the manual?
Questions and answers