V-tech IP-MR18S User Manual page 10

Table 3(Setup):
Item
1. Language reserved.
2. Tone Select Select the chime of Door Station in calling wait state.
3. Tone Volume
4. Unlock Code
5. Card Memory
6. Clock ...
7. Setup Code
8. About
9. Default ...
* Note that you can use another way(#+8002+66666666) to enter the Setup mode.
-8-
Adjust the tone volume for door station in calling.Range
from 01~15
To change unlock code in Common Code Unlock mode,
in 4-digits format. 1111 is the default unlock code.
To choose to use the memory of door station or that of
C5-IPC when access cards are in use
0-Use memory of DS for access
1-Use C5-IPC for access
To set date and time.
Date format:if set to 0,date format is DD/MM/YY,if set to
1,date format is MM/DD/YY.
Time format: if set to 0,time format is 24 hour standard.If
set to 1,time format is12 hour standard.
To change the Program Code.
1. Hardware version---To show the Door
Station(including ACS) hardware information
2. Software version ---To show the Door
Station(including ACS) software information
3. Manufacture Date---To show the manufacturing date
4. Dialing Counts---To show the call operation counts
5. Calls Counts---To show the established calling counts
6. Unlock Counts---To show the unlock operation counts
Restore all Setup parameters to factory default
setting,Please note that this operation is an irreversible
Description
Factory
set
01
03
1111
0
[88888888]