Fenders; Front Fender Removal; Front Fender Installation - Buell Blast 2014 Service Manual

HOME

FENDERS

FRONT FENDER REMOVAL

1. Raise front wheel off ground.
2. Remove front wheel. See
a0129a2x
1. Mounting screw (4)
2. Washers (4)
Figure 2-106. Front Fender Assembly
Mounting Screws
3. See Figure 2-106. Remove four lower fender mounting
screws.
3804
Figure 2-107. Removing Front Fender
4. See Figure 2-107. Remove front fender.
2.5 FRONT WHEEL.
1
2

FRONT FENDER INSTALLATION

1. Raise front wheel off floor.
2. Align front fender mounting holes with front fork bracket.
NOTE
The longer end of the fender faces away from the front end.
3. Apply LOCTITE 243 (Blue) to first few threads of four
fender mounting screws.
4. See Figure 2-106. Install front fender with four fender
mounting screws.
5. Tighten fender mounting screws to 27-30 in-lbs (3.1-
3.4 Nm).
2.23
2004 Buell P3: Chassis 2-61