Get Motion Detection Settings - Cisco WVC210 Reference Manual

Admin-Level CGI Commands
Motion Detection Commands
NOTE
Cisco Small Business Network Camera Exported CGI Commands
For each configured coordinate, the left-top corner is the start position. The right-bottom
corner is the stop position:
The replied coordinate always maps to the 640 x 480 scale, regardless of the
current streaming resolution.

Get Motion Detection Settings

Method: GET
URL: http://<IP>/adm/get_group.cgi?group=MOTION
Please refer to "Get group parameters," on page
Parameter:
Parameter Description
This is a required parameter & value to let the CGI know the
Group
request is for "motion detection" group.
30.
3
38