Motion Vector Data - Cisco WVC210 Reference Manual

Admin-Level CGI Commands
Motion Detection Commands
Cisco Small Business Network Camera Exported CGI Commands
Return:
HTTP/1.0 200 OK\r\n
...
content-type: text/plain\r\n
\r\n
OK\r\n
Notes:
If you are not using Microsoft Internet Explorer, the OCX software requires:
•
Use "md_switch1" as the switch for "full screen" or "sub-windows."
•
The parameter "md_window1" is always set to size 640x480.
•
If "md_switch1=1" is set, then the camera needs the whole screen for video
detection. The user cannot configure the rest of the sub windows.
•
If "md_switch1=0", then the camera detects in the sub window area,
"md_window 2-4."

Motion Vector Data

Motion Vector Data is used to include the motion vector values in the streaming
packets.
Whether the streaming method is ASF (through HTTP) or RTP (through UDP), the
streaming data includes information that lets the client side software judge
whether the motion event is triggered or not.
The data is located in the padding bytes of the streaming data.
For more information about the data format in the streaming packet, refer to the
next section.
3
41