Front Panel Setting (Raptor); Insert ("Y" Shaped) Cable Connection - PROEL EXaverb User Manual

Proel Sound Processors User Manual

Front Panel Setting (raptor)

In order to achieve the best possible acoustic results with your raptor, we suggest you to set "INPUT LEVEL", and
"OUTPUT LEVEL" knobs as shown in figure 4.
Of course please press the "PROCESS" button in its "ON" position.

Insert ("Y" shaped) cable connection

TIP = send to processor
RING = return from effect unit
Notes:
If your mixer has insert circuit with two mono TS jacks instead of just one TRS jack, you can use two discrete mono
cables instead of a "Y" cable.
In order to reduce the risk to pick-up interferences and noises, we suggest you to use short high quality shielded
cables.
figure
4
¼" (6.3mm.) TRS jack
¼" (6.3mm) mono plugs
16