Proel Sound Processors User Manual
Hook-up wiring examples
(exaverb)
exaverb has been designed to be used as mixer external effects unit, thus we suggest you the following hook-up.
SIGNAL
POST-FADER
STEREO AUX
AUX SEND
RETURN or
DIRECTION
(MONO/STEREO)
STEREO CHANNEL
EXAVERB
MIXER
figure1
Note: if your mixer doesn't have an aux send, you can use a sub-group output as send circuit and
a stereo input of your mixer as effect return.
Front Panel Setting (exaverb):
In order to achieve the best possible acoustic results with your exaverb, we suggest you to set "INPUT LEVEL",
"MIX", and "OUTPUT LEVEL" knobs as shown in figure 2.
14