Hook-Up And Setting Example (Raptor) - PROEL EXaverb User Manual

Proel Sound Processors User Manual

Hook-up and setting example (raptor)

raptor has been designed to be used as mixer channel or master output processors. Thus we suggest using the
following hook-up diagram.
MIXER SEND
CHANNEL INSERT
Figure 3
Notes
It's possible to connect another insert cable between mixer channel insert (or any other mixer channel) and raptor
"B" in/out connectors, thus simultaneously using the effect on two channels. Anyway this solution could slow down
the sound and software processing since two channels will be simultaneously processed.
It's possible to connect (upon your mixer design) the processor to your FOH mixer sub-group insert (e. g. the vocal
sub-group), as well as to a sub-group insert of your FOH or Monitor mixer.
It's possible, but we strongly suggest not to do it, to connect the raptor to the mixer main mix inserts. In these cases
the entire signal will be treated in the same way (applying the same equalization and/or compression), thus making
a less natural mix.
figure 2
PROCESSOR OUTPUT
MIXER
Insert
Cable
15
RAPTOR