Ford F-650 2015 Owner's Manual page 22

Vehicle Inspection Guide
Torsion arm and Verify torsion arm is not cracked, broken or
shock absorbers missing.
Inspect the shock absorber for cracks or leaks.
There should be no missing or broken mounting
bolts or worn bushings.
• Inspect for cracked, worn or frayed hoses.
Hoses
Verify all couplings are secure.
Brake chambers Verify:
• There are no cracks or dents
• They are securely mounted.
Slack adjuster Inspect for broken, loose or missing parts.
Note: The angle between the push rod and
adjuster arm should be approximately 90 degrees
when the brakes are applied. When pulled by
hand, the push rod should not move more than
approximately 1 inch (2.5 centimeters).
Drum Verify:
• There are no cracks, dents, holes and no loose
or missing bolts
• The brake linings are not worn, dangerously
thin or contaminated by lubricant.
Spacers Verify:
• Even separation of dual wheels
• The tires are not touching one another.
Rims Inspect for damaged or bent rims. Rims should
not have welding repairs, and no rust trails,
which indicate it is loose on the wheel.
Lug nuts Verify all lug nuts are present and not loose (look
for rust trails around the lug nuts). There should
be no cracks radiating from the lug bolt holes or
distortion of the bolt holes.
2015 F-650/750 (f67)
Owners Guide gf (ownloose), 1st Printing, December 2013
Canadian_French (fr_can)
Rear suspension
Rear brakes
Rear wheels
I n f o r ma t i o n P r o v i d e d b y :
21