Table of Contents
Advertisement
7902 - 7905 | Installation and Operational Manual
•
Switches 1, 2 & 3
#1 Any position
#2 OFF tamper switch active, ON override tamper switch
(tamper OFF)
#3 always OFF (N last)
•
Rotary switch
Any position (automatically linked to camera in line)
•
PIR terminal block (Alarm/Action Box only)
Link NC to - when no PIR is used.
Tamper switch active
On the circuit board a tamper switch secures the box. When opening
the box this switch triggers an alarm on the monitor. To suppress a
continuous alarm message while servicing the system, the tamper-
switch override is set in the OFF position.
CAUTION:
Don't forget to reactivate the tamper switch by switching
the override to the TAMPER position!
Bosch Security Systems | 2004-06
EN | 14
Advertisement
Table of Contents
