Canon MB2300 series Online Manual page 688

Errors When You Receive a Fax
If an error occurs when you receive a fax, the error number is printed on RX REPORT or ACTIVITY
REPORT (there are some errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No. Cause
#003 It takes too long to
receive a page.
#005 No answer.
#037 Memory is full.
#046 Reception has been
rejected due to the
specified fax rejection
condition.
#099 The Stop button was
pressed during
reception.
#995 The received fax was
deleted.
Action
Contact the sender and have the sender divide the fax or set the image quality
(Fax resolution) to a lower setting and resend it.
When receiving a fax manually, the machine could not detect the signals from the
sender's fax machine.
Contact the sender and have the sender resend it, or set the machine to receive
the fax automatically.
The machine could not receive a fax because its memory is full.
Delete contents in memory, then ask the sender to resend the fax. See
Stored in Machine's Memory.
Reception has been rejected because the fax matches the fax rejection condition
specified by FAX reception reject in Security control under FAX settings.
For details, see Rejecting Fax
The Stop button was pressed to cancel reception of the fax. Contact the sender
and have the sender resend it if necessary.
The received fax was deleted before being saved to the USB flash drive,
forwarded to the shared folder on the computer, or printed. Contact the sender and
have the sender resend it if necessary.
688
Reception.
Document